Do not rely on components like the drive cage, power supply, or computer cover to push cables down into the chassis. Connect internal cables to the system board, if needed. If not I will try to use the Drivermax sugesstion, that actually sounds like it may work! The lifetime of the lithium battery can be extended by plugging the computer into a live AC wall socket. This allows for different audio applications to use separate audio ports on the system.

Uploader: JoJojin
Date Added: 2 September 2017
File Size: 5.10 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 24628
Price: Free* [*Free Regsitration Required]

Type 3 Battery Holder.

Connect external cables to the installed card, if needed. Sharp creases may damage the wires.

System Board Drive Connections Refer to the following illustration and table to identify the system board drive connectors. To remove and replace a drive in the carrier:.

The HP-supplied metric guide screws 1 are black. Push the other edge down until the clamp snaps over the other edge of the battery. In either mode, the maximum operational speed is determined by the slowest DIMM in the system.

Let HP identify any out-of-date or missing drivers and software. Systems with disc encryption enabled. Removing an External 5. Heatsink Prepare the ddevice for disassembly Preparation for Disassembly. Keep cables away from major heat sources like the heatsink. Not sure which drivers to choose?


HP Sound / Audio Drivers Download

Guess I need to borrow someones laptop and attempt it again. Javascript is disabled in this browser.

The hard drive is housed in a carrier that can be quickly and easily removed from the drive bay. If you are installing a diskette drive, connect the data cable 1 and power cable 2 to the back of the drive.

The screws used in the computer are of different thread sizes and lengths; using the wrong screw in an application may damage the unit. Place the processor in its socket and close the retainer. We have the following 22 documents available for the Compaq dc If replacing only the card, you can remove the card from the system board but leave the post in place. Technical data is gathered for the products supported by this tool and is used to identify products, provide relevant solutions and automatically update this tool, to improve our products, solutions, services, and your experience as our customer.

The memory sockets on the system board can be populated with up to four industry-standard DIMMs. Align the ReadyBoost module with the connector on the system board and the locking tip on the standoff.


Unknown Device: PCI Standard ISA Bridge – Forums – CNET

Remove the heatsink Heatsink. Adherence to the procedures and precautions described in this chapter is essential for proper service. Thank you for helping us maintain CNET’s great community. Heatsink retaining screws should be tightened in diagonally opposite pairs as in an X to evenly seat the heatsink on the processor. Lift up on the tab at the top of the lock and rotate the lock open. Compaq Presario CQ60 Driver. Inknown the processor baffle Processor Baffle.

Practically all basic specifications of the product are listed on the …. You will see a results page similar to the one below: To reduce risk of personal injury from hot surfaces, allow the internal system components to cool before touching.

System Board Drive Connections.